IBM 8677 - BladeCenter Rack-mountable - Power Supply Hardware Maintenance Manual And Troubleshooting Manual page 54

10. If desired, write identifying information on one of the user labels that come with
11. If you have other blade servers to install, do so now.
Important: Reinstalling a blade server into a different bay than the one from which
it was removed could have unintended consequences. Some configuration
information and update options are established according to bay number. You might
need to reconfigure the blade server.
If this is the initial installation for a blade server in the BladeCenter unit, you need to
configure the blade server with the blade server Configuration/Setup Utility program
and install the blade server operating system. See the documentation that comes
with the blade server for instructions.
44
BladeCenter E Type 8677 and 1881: Hardware Maintenance Manual and Troubleshooting Guide
the blade server; then, place the label on the BladeCenter bezel just below the
blade server, as shown in the following illustration.
User
label
Important: Do not place the label on the blade server or in any way block the
ventilation holes on the blade server.