Automatic Busy Redial - Toshiba DKT3220-SD - Digital Phone - Charcoal User Manual

Advanced Operation

Automatic Busy Redial

Automatic Busy Redial
After reaching a busy outside number, you can activate Automatic Busy Redial so that
the system automatically redials the number at regular intervals. The system repeats
the redial until the destination is no longer busy. This feature may not be on some
telephones on your system.
Automatic Busy Redial is not attempted while your station is busy, but continues to
time-out. The system inserts a pause (P) on your LCD before redialing the number.
To activate Automatic Busy Redial
1. When you reach a busy number, press
The LED flashes red. You hear confirmation tone.
2. Hang up or press
seconds (depending on system programming). Your telephone receives ring tone
when Automatic Busy Redial dials the number and it is available. The extension
and Spkr LEDs flash green.
3. Lift the handset or press
up the handset or press
connection is made, you hear a muted ring for another 30 seconds, then the call
disconnects.
To cancel Automatic Busy Redial
Press
38
Downloaded from www.Manualslib.com
Spkr
. The system redials, up to five to 20 times, every 30 to 180
Spkr
Spkr
Auto Busy Redial
manuals search engine
Auto Busy Redial
and wait for the party to answer. If you do not pick
within recall timeout (five to 60 seconds) after a
#442
or extension + .
Strata CIX and CTX IPT/DKT Telephone
Cnf/Trn #441
or + .
08/05