Soft Keys - Toshiba DKT3220-SD - Digital Phone - Charcoal User Manual

Advanced Operation

Soft Keys

Soft Keys
When Soft Keys are on, they replace the functions on the
buttons below the LCD. The following table defines Soft Key Prompts.
Table 1
Soft Key
ABR
ACB
BUSY
CONF
EXEC
EXIT
JOIN
LINE
MESG
OVRD
PGE
RING
RLS
RTRN
SPLT
STA.
TALK
TRNS
32
Downloaded from www.Manualslib.com
Soft Key Prompts
Definition
Activates Automatic Busy Redial after dialing a busy outside telephone number.
Activates Automatic Callback after reaching a busy station, CO line, or CO Line group.
(Busy Override) Sends a call-waiting tone to a busy station.
Initiates or completes a conference.
(Executive Override) Breaks into the conversation of a busy called station.
Exits you from a conference; remaining parties are connected.
Joins all parties to a conference while on a conference call.
Adds a CO line to an existing call while in the Conference mode. The LCD prompts
you to access a CO line after you press this key.
Sets a message waiting indication at a busy or unanswered station.
Overrides options, busy mode, or overrides Do Not Disturb mode.
Enables you to enter a Page Group number (01~16).
Makes a called station ring when making a voice announce call to the station.
Disconnects a call and returns telephone to the idle state.
Terminates a feature operation and to return to a previously displayed state.
Enables you to break off from a conference call with another conference call member
for a private conversation (split). You can use the Join key to reconnect both of you
back into the conference. You must be a conference master to use this. See
instructions for Conference Split/Join/Drop for further instruction.
Adds a station to an existing call while in the Conference mode. The LCD prompts you
to dial a station number after you press this key.
Makes a voice announcement to a called station that is ringing.
Initiates or completes a Transfer while on an outside call. Press once for an immediate
or announced transfer, depending on system programming. Pressing TRNS again
completes the transfer.
manuals search engine
SK1 SK2
,
Strata CIX and CTX IPT/DKT Telephone
SK3 SK4
, and
08/05