Table 13
Entry
*
Hold
+
*
(1~9)
**
*
#
Example of Special Character Usage
To create a One Touch for Park and Page under one button, program the following
sequence under the One Touch button.
CNF #33***HOLD FB1 #30
CNF
#33
**
and display the selected orbit on the phone.
*
user to view the selected orbit on the display. The dial string will restart from this
point when the One Touch button is pressed again.
FB1
#30
orbited call.
To Use a One Touch Button
Press the One Touch button.
Setting/Changing a Personal Speed Dial Code
See
Strata CIX and CTX IPT/DKT Telephone
Downloaded from
www.Manualslib.com
Special Characters
Meaning
Indicates "stop." The One Touch button blinks rapidly and stops the delivery of
the remaining digits in the string until it is pressed again. Multiple "stops" can be
programmed into one string.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter
additional pause escape sequences. For example, to insert a 17-second pause,
*9*8
enter
. The display of a pause in the Speed Dial Number shows a "P"
without specifying the duration. In this example, you would see "PP."
*
#
– puts the caller on hold and gets new dial tone.
– code to park call
– this special character outputs a single * which will select an available orbit
HOLD
– This special character is a Stop. The dial string pauses and enables the
– gets new dial tone on the PDN
– code for All Call Page which allows the user to page the location of the
"Storing a System/Station Speed Dial Number" on page
manuals search engine
08/05
User Programming
One Touch Buttons
68.
113