Phone Setting - Timer - D-Link DPH-120S Quick User Manual

Call Forward
7.14 Phone Setting – Timer
NTP Recycle
Inter Digit
Originating Not Accept
Incoming No Answer
Hold Recall
Click No Answer to enable call forward to another number
when no one answers the phone after 180s (default). The
timer can be changed from 0-600s. Refer to section 7.14 to
change the timer.
Click Busy to enable call forward to another number when
user is busy on the phone.
Click Unconditional to transfer all incoming calls to
another number.
Enter the call forward number on the text box.
NTP recycle time.
The time interval that the IP phone waits to detect the end
of DTMF digits. No more digits are accepted after this
period and the phone begins to dial.
The time interval that the caller's phone waits to establish
a call. If the receiver fails to answer the phone during this
time interval, the caller's phone will automatically
disconnect.
The time interval that the receiver's phone will ring. If the
receiver fails to answer the phone during this time
interval, the phone will automatically disconnect.
The time interval that the caller is put on hold before the
phone automatically disconnect.
28