Management Setting - Restore Factory Setting - D-Link DPH-120S Quick User Manual

User Name
Password
NTP Server IP
Time Zone
TFTP Server
FTP Client
Remote Config Password
7.3 Management Setting – Restore Factory Setting
Click on Management. Select Restore Factory Setting and the above screen will display on the
screen.
Restore Factory Setting
Configuration menu login name.
Configuration menu login password.
Network Time Protocol (NTP) is a protocol used to help
match your system clock with an accurate time source (eg
atomic clock, time server). It is good practice to have all
your networked computers synchronized with one server.
Select your time zone. If there is daylight saving in your
area, click the check box.
Enable or disable TFTP server to allow transfer of
firmware from a computer to the IP phone.
Enable or disable IP phone to download files from FTP
server and update the firmware automatically.
Remote password to access the configuration menu from
VoIP software (You may download this software from
your supplier's website). Default password is 1234 .
Restores all the settings back to factory default settings.
19