Installing the air baffle
To install the air baffle, complete the following steps:
1. With the rear (hinged) part of the air baffle lifted up, align the positioning pins on
2. Slide the air baffle down into the server 1 until the positioning pins fit into the
3. Rotate the rear (hinged) part of the air baffle 2 down to the system board.
4. Return the power-supply cage to its closed position (see "Closing the
5. Install the hot-swap power supply or power supplies (see "Installing a redundant
6. Install and lock the left-side cover (see "Completing the installation" on page
7. Reconnect the external cables and power cords; then, turn on the attached
the ends of the air baffle with the locating holes in the server chassis and fan
cage assembly.
locating holes; then, press down on the air baffle until the pinch tab clicks into
place.
Note: Make sure that the power-supply cage cables are not caught under the
air baffle.
power-supply cage" on page 65).
power supply and fans" on page 102).
105).
devices and turn on the server.
Chapter 2. Installing optional devices
61