Reconnecting A Copper Cable To An Lcc - Dell DAE2-ATA Hardware Reference Manual

Servicing a DAE2
Figure 3-13
3-18 2-Gigabit Disk-Array Enclosure (DAE2) Hardware Reference
PRI
Connector
To other FC device

Reconnecting a Copper Cable to an LCC

4. Remove and store the ESD wristband.
The configuration example in Figure 3-14 shows a CLARiiON® CX300 disk
processor enclosure (DPE2) below three DAE2 disk-array enclosures. Note
that the external device connects to the Primary disk enclosure connectors,
and subsequent enclosures connect in an Expansion-to-Primary chain.
EMC2772