Using The Quick Menu - Fujitsu S1500M - ScanSnap - Document Scanner Operator's Manual

■ Using the Quick Menu

The scanning method described below is for the case when you use the Quick Menu.
1.
Check for the [ScanSnap Manager] icon
below.
2.
From the Right-Click Menu, select [Scan Button Settings].
⇒
The ScanSnap setup dialog box appears.
3.
Select the [Use Quick Menu] check box.
When the [ScanSnap Manager] icon
Programs] → [ScanSnap Manager] → [ScanSnap Manager] to start up ScanSnap
Manager. Generally, ScanSnap Manager is registered under [Startup] when installed, so
that its icon is displayed on the taskbar when Windows starts.
When it is not registered under [Startup], select the [Start] menu → [All Programs] →
[ScanSnap Manager] → [Startup Register] to register ScanSnap Manager.
For details about scanning documents without using the Quick Menu, refer to
Using the Quick Menu" (page 60).
How to Perform a Scan (for Windows Users)
on the taskbar as shown
is not displayed, select the [Start] menu → [All
55
"Without