Fujitsu S1500M - ScanSnap - Document Scanner Operator's Manual page 264

3.
Click the [Apply] button in the ScanSnap setup window.
4.
Click the [ ] button in the upper left corner of the window or press the
[esc] key to close the ScanSnap setup window.
5.
Load the document into the ScanSnap.
For details, refer to
Documents" (page
6.
Press the [Scan] button on the ScanSnap.
If you select [Simplex scan] from the ScanSnap Manager menu, even if [Duplex Scan
(Double-sided)] is set in [Scanning side] on the [Scanning] tab, the scan will be performed
in Simplex mode.
⇒
The document is scanned in Simplex mode.
Using the ScanSnap in Various Ways (for Mac OS Users)
"Paper Sizes of Documents to Be Scanned" (page 26)
28).
264
and "Loading