7.
Press the [Scan] button on the ScanSnap.
⇒
Scanning is started.
•
By default, the [Scan] button settings are set to [Duplex Scan (Double-sided)].
With ScanSnap Manager, you can switch the [Scan] button settings to [Simplex Scan
(Single-sided)] mode. For details, refer to
•
You can start scanning from the Right-Click Menu.
For details, refer to
•
Do not connect or disconnect the ScanSnap and other USB devices during the scan-
ning operation.
•
Do not close the ADF paper chute (cover) during the scanning operation.
•
Do not switch users during the scanning operation. Doing so cancels scanning.
⇒
The [Scan] button on the ScanSnap blinks blue during the scanning operation.
The following dialog box appears to indicate the scanning status.
⇒
When the scanning is complete, the Quick Menu appears.
How to Perform a Scan (for Windows Users)
"Changing Scanning Settings" (page
"Right-Click Menu" (page
57
52).
64).