3.
Click the [Apply] button in the ScanSnap setup window.
4.
Click the [
] button in the upper left corner of the window or press the
[esc] key to close the ScanSnap setup window.
Even if the [Scan] button on the ScanSnap is pressed, the ScanSnap setup window
closes.
5.
Load the business card into the ScanSnap.
• Load the business card so that the front side of the two-sided business card faces
the ADF paper chute (cover).
• To scan multiple business cards, load business cards in a pile.
• Move the side guides so that there is no gap between the business cards edge and
the side guide on both sides.
6.
Press the [Scan] button on the ScanSnap.
⇒
Scanning is started.
⇒
When scanning is complete, the Cardiris window appears.
About Actions (for Mac OS Users)
254