Maytag MER5765RAB - 30 Inch Electric Range Use And Care Manual page 23

Precision touch controm 500 electric smoothtop
Table of Contents

Advertisement

Available languages

Available languages

PROBLEM
SGLUTmON
Smoothtop
surface shows
wear.
Moisture
commects on oven
window or steam comes from
oven
vent.
There is a strong odor or might
smoke when oven is turned on.
FaamtCodes
Noises may be heard.
There are no beeps and
SAb flashing and then
dispiayed continuously.
Tiny scratches or abrasions.
- Make sure cooktop and pan bottom are dean. Do not sHide gHassor metaHpans
across top. Make sure pan bottom is not rough. Use the recommended
cleaning agents. See page 18=
, Metal marks.
- Do not sHidemetal pans across top. When cool dean with Cooktop
Qeaning Creme=See page 18=
, Brown streaks and specks.
- Remove spills promptly. Never wipe with a soiled cloth or sponge. Make sure
cooktop and pan bottom are clean.
, Areas with a metallic sheen.
- Mineral deposits from water and food. Use recommended cleaning agents.
See page 18=
, Pitting or flaking=
- Remove sugary boilovers promptly. See page 18.
, This is normal when cooking foods high in moisture.
, Excessive moisture was used when cleaning the window.
, This is normal for a new range and will disappear after a few uses. Initiating a clean
cycle will "burn off" the odors more quickly=
, Turning on a ventilation fan will help remove the smoke and/or odor.
, Excessive food soils on the oven bottom. Use a self-clean cycle.
, BAKE or LOCK may flash rapidly in the display to alert you if there is an error
or a problem= if BAKE or LOCK appear in the display, press CANCEL pad=
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power, if the flashing still continues,
disconnect power to the appliance and call an authorized servicer.
, If the oven is heavily soiled, excessive fiareups may result in a fault code during
cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out
excess soil, then reset the clean cycle. If the fault code reappears, contact an
authorized servicer.
, The oven makes several low level noises. You may hear the oven relays as they go on
and off=This is normal
, As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and will not damage your appliance.
, Oven may be in Sabbath Mode. See page 14.
, Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five
seconds.
22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mer5765rab

Table of Contents