Maytag MGDZ400TQ - 27" Gas Dryer Use And Care Manual page 12

Choose your exhaust installation type
Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer. Other installations are possible.
B
...................................... C
F
..................................... G
A. Dryer
B. Elbow
C. Wall
D. Fxhaust hood
E. Cla raps
£ Rigid metal or flexible metal vent
G. Vent length necessary to connect elbows
H. fxhaust outlet
Optional exhaust installations
Fire Hazard
Cover unused exhaust holes with one of the
following kits:
279818 (white)
279820 (black)
280102 (pacific blue)
Contact your local dealer.
Failure to follow these instructions can result in death,
fire, electrical shock, or serious injury.
This dryer can be converted to exhaust out the right side, left side, or through the bottom.
Contact your local dealer to have the dryer converted.
B
A. Standard rear offset exhaust installation
B. Left or right side exhaust installation
C. Bottom exhaust installation (not an option with
pedestal installations)
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best for your installation. Two close-
clearance installations are shown. Refer to the manufacturer's instructions.
!z__ ,'>... ...........
<
i i
, ._===-f/"
i i /z
i t/
i u
x\ ii
,.__ _ X.L __
A B
A. Over-the-top installation taho available with one
offset elbow)
B. P_'riscope installation
NOTE: The following kits for close clearance alternate installations are available for purchase.
Please see the "Assistance or Service" section to order.
• Over-the-]op installation:
Part Number 4396028
• Periscope Installation (For use with dryer vent to wall vent mismatch/:
Part Number 4396037 - 0" (0 cm) to 18" (45.72 cm) mismatch
Part Number 4396011 - 18" (45.72 cm) to 29" (73.66 cm) mismatch
Part Number 4396014- 29" (73.66 cm) to 50" (127 cm) mismatch
12