Prepare to Print and Use the Wizard
Before you can print, you need to load paper and
insert your memory card in PictureMate.
Load Paper
Follow these steps to load PictureMate Photo Paper:
Caution:
Don't load plain paper; this may damage PictureMate.
1
Move the handle to the back and down. Then
open the paper support and output tray.
Move handle
to the back
and down
Open output tray
Note:
Keep the handle all the way down when printing,
to allow paper to feed through.
2
3
Open paper
support
4
Note:
Pack. See page 33 for more information.
Slide the top part of the paper support up gently
until it clicks into place.
Place your paper against the right edge, with the
glossy side up.
Edge guide
Note:
Make sure paper is glossy side up to prevent
smearing.
Slide the left edge guide against the paper. Make
sure it is snug, but not so tight that paper can't
move.
When you need more paper, order a PictureMate Print
Load glossy
side up
5