Epson PictureMate - Compact Photo Printer Using Manual page 24

9
If you don't need to change any other settings,
press Print. Check your selections on the Print
Confirmation screen and press
Note: See page 24 for more information about the Print
Confirmation screen.
Automatically Fix Photos
PictureMate can automatically enhance or fix the
appearance of your prints.
1
Select the photo(s). (See page 12.)
2
On the Main Menu, press
More Options, then press OK.
3
Press or to highlight Auto Correct, then
press OK.
22
Print again.
or to highlight
4
Press or to choose one of the options.
Enhance - PictureMate chooses this setting
automatically if it detects P.I.M. or Exif Print
information that your camera saved in your
digital files. This information helps ensure an
accurate image reproduction.
Fix - Use this if a print does not look good; for
example, this may correct images that are too
dark, too bright, or backlit.
None - Prints photos as is or bypasses P.I.M.
or Exif Print data (default setting for files with
no P.I.M. or Exif Print data).
5
Press OK.
Note: This setting remains in effect until you press
Cancel for 3 seconds or turn PictureMate off.
6
If you don't need to change any other settings,
press Print. Check your selections on the Print
Confirmation screen and press
Note: See page 24 for more information about the Print
Confirmation screen.
Print again.