Prepare to Print
Before you print with PictureMate, you need to:
●
Load paper (below)
●
Insert your memory card (see page 6)
When you finish printing, you can remove your
memory card (see page 7).
Note:
The illustrations in this manual show the PictureMate
Snap, but the instructions cover both PictureMate Snap and
PictureMate Flash, except where noted.
Loading Paper
Caution:
Don't load plain paper; this may damage PictureMate.
1
Move the handle to the back.
2
Open the paper support.
3
Press the Open button to open the output tray.
5