Epson PictureMate - Compact Photo Printer Using Manual page 50

Printing and Noise Problems
PictureMate makes an unexpected noise after you
install a photo cartridge.
The first time you install the photo cartridge,
PictureMate will charge its print head for about three
minutes. Wait until charging finishes before you turn it
off, or it may charge improperly and use more ink the
next time you turn it on.
Your PictureMate makes an unexpected noise when
you turn it on or after it has been sitting for awhile.
PictureMate is performing routine maintenance.
PictureMate sounds as though it is printing, but
nothing prints.
PictureMate may be preparing to print.
Make sure the print head nozzles are not clogged.
To clean the print head, see page 44.
PictureMate won't work properly if it's tilted or at
an angle. Place it on a flat, stable surface that
extends beyond the printer base in all directions.
Make sure paper is not jammed and is loaded
correctly so it can feed into PictureMate. Make
sure the handle is not resting on the paper. See
page 5 for paper loading instructions.
48
Your memory card does not work correctly.
Make sure you are using a compatible memory
card. See page 6.
Make sure only one card is inserted at a time.
PictureMate does not read from multiple cards at
once.
Photos must be in JPEG or Uncompressed TIFF
format and taken with a DCF-compliant camera.
PictureMate can recognize and print the first 999
photos on your memory card.
Photo Quality Problems
You see banding (light lines) in your prints.
The print head nozzles may need cleaning; see
page 44.
Make sure the glossy side of the paper is face up.
The photo cartridge may need replacing. To
replace the cartridge, see page 33.
The print head may need aligning; see page 45.