Table of Contents
Advertisement
Part 3: Operating Instructions
c) Connecting the Infrared interface
When transmitting data from the computer to the printer through the built-in IrDA,
beware of the following:
• The printer and computer IrDA transitters should be within 1 m of each other.
(Depending on the computer, infrared rays may not reach the printer's IrDA
transmitter)
• The printer IrDA module angle is must be within 15 degrees of the vertical and
horizontal optical axis.
• Scanning a 180dpi color A4 document with the optional scanner cartridge can take
up to 30 minutes. The use of bidirectional centronics interface for data
transmission is recommended.
Figure 3-5 IrDA Angle of Rotation
When both interface mediums, i.e. the bidirectional centronic interface
and the IrDA, are connected, the printer automatically, switches over to
the interface medium that first detects the computer signals.
IrDA
15
3-4
BJC-50
15
Advertisement
Table of Contents
