Part 3: Operating Instructions
1.2 Installation
1.2.1 Installation space
Install the printer with the clearances given below for the printer to be operated
efficiently. The spaces required to install the printer are shown below.
Figure 3-2 Installation Space
• Use the printer within the following ranges of temperature and humidity:
Ambient temperature: 5 °C to 35 °C
Relative humidity: 10% to 90% (without condensation)
• Install the printer on a flat sturdy surface. Do not install it in places
where it is subjected to vibration.
• Do not install the printer in places where it is exposed to direct sunlight
or near a heater or air conditioner where the temperature changes
greatly. Do not leave the printer in a car where the temperature rises
suddenly.
• Do not install the printer in places where dust accumulates or it is
subjected to salty wind.
• Do not place it near a television set, speaker, or other devices which
generate magnetic fields.
3-2
BJC-50
49mm