Transporting The Printer; Carrying The Printer - Canon BJC 50 - Color Inkjet Printer Service Manual

BJC-50

2. TRANSPORTING THE PRINTER

When carrying or transporting the printer, leave the BJ cartridge in or place it in the
cartridge container to prevent ink leakage and drying of cartridge nozzles. The printer
may be left installed.

2.1 Carrying the Printer

Before carrying the printer, do the following:
1) Press the POWER button to turn the printer off and close the top cover. When the
power goes off, the display turns off.
2) Unplug the interface cable.
3) Disconnect the DC plug of the Universal adapter from the printer. Disconnect the
AC plug of the Universal adapter from the outlet.
4) Make sure that the BJ cartridge is at the capping position (right edge of the printer).
If it is not at the capping position, turn the printer on again and perform step 1 and
subsequent steps to move the carriage to the capping position.
5) Slide the Lock switch to the lock position.
2.2 Transporting the Printer
Before transporting the printer, do the following:
1) Disconnect the interface cable and the Universal adapter in the same way as when
carrying the printer.
2) Pack the printer and Universal adapter with the original packing materials.
If you cut off the power to the printer by just disconnecting the Universal
adapter or take out the BJ cartridge and carry it around by itself, the
cartridge is not capped, so ink can leak or dry up in the nozzles.
If you have thrown the original packing materials away, pack the printer
with plenty of shock absorbing material.
3-11
Part 3: Operating Instructions