Print Position - Canon BJC 50 - Color Inkjet Printer Service Manual

Part 5: Maintenance

5. Print Position

Correction
Detection Error
6. Low Battery
Error
<Measure>
Start recharging
for universal
adapter?
Yes
Recharge battery.
Is an error
displayed?
Yes
Replace with another
battery.
Start recharging?
Yes
END
7. Thermistor Error
<Cause>
Print position correction cannot be detected properly.
<Suspected part>
<Measure>
Same as when the home position sensor error is
displayed.
<Cause>
The voltage of the lithium ion battery is incorrect.
(10.0Vdc or lower)
<Suspected part>
No
1. Replace the universal
adapter.
2. Replace the control
board.
No
Replace the
control board.
No
Leave the battery in
optimal temperature for a
while and try recharging it.
<Cause>
The thermistor is faulty.
<Suspected part>
<Measure>
Replace the control board.
5-14
Carriage motor, control board,home
position sensor
Lithium ion battery, Universal adapter,
Control board
Thermistor
BJC-50