Snmp Trap Manager Configuration - D-Link DES-5600 User Manual

Fast Ethernet Switching System User's Guide
1.
2.
3.

SNMP Trap Manager Configuration

Displayed in Figure 28, the panel enables you to configure the SNMP Trap
Manager settings.
Figure 28: SNMP Trap Manager Configuration
IP Address
Enables you to enter the IP address of trap managers.
SNMP Community String
Enter the Community String of the Trap Managers in this field.
Traps are messages the DES-5600 sends out to inform trap managers of events on
the network. The DES-5600 generates traps and sends them to the network
manager. Trap managers are special network users who are given certain rights
and access to oversee and maintain the network. This feature is available only in
D-View or by using other SNMP management software.
You can specify which network managers may receive traps from the DES-5600
by creating a list of IP Addresses of the authorized network managers.
Trap managers can receive the following trap types:
Managing the DES-5600
Select the appropriate field with the Tab and arrow keys. Enter the
new value or toggle the space bar to change the settings.
Select Save and press enter.
Reboot the DES-5600 to make the changes effective.
Cold Start
54