Setting The Pc Audio - Toshiba 40E220U User Manual

Using theTV'sfeatures
(31
Using the PC settings jeature
*_,J !
NOTE Thescreen is disrupted momentarily w hileadjusting thePCsettings.
Thisis nota signof malfunction.
Mode. Description."
Horizontal Position Moves thepicture left!right. Theadjustment range is within+10from
center.*
Vertical Position Moves thepicture up/down. Theadjustment range is within +10from
center.*
ClockPhase Helps to reduce noise andsharpen t hepicture. Theadjustment range is
within+16fromcenter.*
Sampling Clocks Helps to reduce n oiseandminimize periodic vertical s tripes onthe
screen. Theadjustment range iswithin+10fromcenter.*
Reset Highlight t his item, a ndthenpress theENTER button togetan
optimum adjustment automatically.
* The default settings and/or adjustment ranges may vary depending on the
input signal format.
SeltingthePCAudio
You can output or mute sound from your computer when
connecting it to your TV using the AUDIO IN terminal and PC
audio cable.
To set the PC Audio:
1
2
3
Press the MENU button and open the Sound menu.
Highlight Audio Setup, and then press the ENTER button.
Press the (A/V arrow) buttons to select PC Audio, and then
press the (@/_ arrow) buttons to select No or Yes.
o*,o Yes: When viewing the PC input, the audio from the PC
Audio input can be heard.
°,*o No: When viewing the PC input, there will be no audio.
NOTE Because thePCand HDMI1 inputssharethesame set ofanalog
audioinputs,the PCAudiomenusettinginfluences theHDMI1
Audiomenusetting.If PCAudiois setto "No"theHDMI1 Audio
settingchanges to "Auto."If PCAudiois setto "Yes"theHDMI1
Audiosettingis setto "Digital"and isgrayedout in themenu.(See
also"Setting the HDMI®audiomode"on page 50)