Settingthesleeptimer; Auto Brightness Sensor - Toshiba 40E220U User Manual

Using theTV'sfeatures
QQ
Setting the sleep timer
Settingthesleeptimer
You can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1 Press the SLEEP button on the remote control to set the length
of time until the TV turns off.
Repeatedly press the SLEEP button to increase the time in
10-minute increments, or press the (A/Y arrow) buttons to
increase or decrease the time in 10-minute increments, to a
maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1 Press the MENU button and open the Setup menu.
2 Highlight Sleep Timer and press the ENTER button.
3 Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press ENTER.
Or press the (4 _ arrow) buttons to increase or decrease in 10-
minute increments (maximum of 12 hours).
NOTE
If a powerfailureoccurs, t hesleeptimersettingmaybecleared.
To display the time remaining until the TV turns off, press the
SLEEP button.
NOTE A message will displayon-screen whenthereis oneminute
remaining on thesleeptimer.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.
Auto Brightness Sensor
When the Auto Brightness Sensor Setting is set to On, the
television optimizes the backlighting levels to suit ambient light
conditions.
To turn on Auto Brightness:
1 From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
2 Press the (A/Y arrow) buttons to select Auto Brightness
Sensor.