8
Using theTV'sfeatures
Agtjusting the audio
To listen to an alternate language on an ATSC digital station (if
available), highlight the Language
field in step 3 above, and then
press the (4/_
arrow) buttons to select the language you prefer.
To listen to a second audio program on an analog station, if
available, select SAP in step 3 above.
NOTE
o:o A second audioprogram(SAP) canbe heard only on those TV
stationsthatofferit. Forexample, a stationmightbroadcast
anotherlanguage asa second audioprogram.If youhaveSAP
on,youwill seethecurrent p rogramon thescreen buthearthe
otherlanguage instead of theprogram's n ormalaudio.
o:o If youhaveSAPon andthestationyou arewatchingis not
broadcasting a second audioprogram, t hestation'snormal
audiowill beoutput.However, occasionally t hereis no soundat
all in SAPmode.If this happens, s ettheMTSfeature to Stereo
mode.
Adjusting t heaudio qualily
You can adjust the audio quality
by adjusting
the bass, treble and
balance.
To adjust the audio quality:
1
Press the MENU
button and open the Sound
menu.
2
Highlight
Audio Settings,
and then press the ENTER
button.
3
Press the (A/Y
arrow) buttons to highlight
the item you wish
to adjust (Bass, Treble, or Balance).
4
Press the (_/_
arrow) buttons to adjust the level.
o*,o @ makes the bass or treble weaker or increases
the balance
in the left channel
(depending
on the item selected).
o*,o _ makes the bass or treble stronger
or increases
the
balance
in the right channel
(depending
on the item
selected).
5
To save the new settings,
highlight
Done, and then press the
ENTER
button.
To reset the settings
to the factory defaults,
highlight
Reset,
and then press the ENTER
button.