Viewing The Digital Signal Meter - Toshiba 40E220U User Manual

Setting upyourTV 51
Vi_ing the digital signal meter
Mode. Description."
Whenviewingthe HDMI1 input,if digitalaudiofromtheHDMI ®
Auto inputisavailable, i t will beoutput.If not,theTVwill automatically
detect a ndoutputanalogaudiofrom thePCAudio input.
Whenviewingthe HDMI1 input,digitalaudiofromthe HDMI ®
Digital inputwill beoutput.
Whenviewingthe HDMI1 input,analog audiofromthePCAudio
Analog inputwill beoutput.
4 To save the setting, highlight Done, and then press the ENTER
button.
NOTE Because thePCand HDMI1inputssharethesamesetof analog
audioinputs,the PCAudiomenusettinginfluences theHDMI1
Audiomenusetting.If PCAudiois setto "No"theHDMI1 Audio
settingchanges to "Auto."If PCAudiois setto "Yes"theHDMI1
Audiosettingis setto "Digital"and isgrayedout in themenu.See
"SettingthePCAudio"on page 91.
Viewing thedigital s ignal m eter
You can view tile digital signal meter in tile ANT/CABLE digital
TV input source only.
To view the digital signal meter:
1 Press the MENU button to open the Setup menu.
2 Highlight Installation, and then press the ENTER button.
A new set of Installation menu icons appears.
3 Open the Terrestrial menu, highlight Signal Meter, and then
press the ENTER button.
4 Press the (A/Y/,_/_ arrow) buttons to select the antenna input
and digital channel signal you wish to check.
NOTE .:. Thephysical d igitalchannel n umberlistedin theSignalMeter
screen maynotcorrespond to a virtualTVchannel n umber.
Contact y ourlocalbroadcasters to obtaintheRFchannel
numbers for yourlocaldigitalstations.
¢ Thesignalstrength doesnotchange between virtualchannels on
thesamephysical c hannel.