Toshiba 40E220U User Manual page 55

Usingthe TV's features _
Selecting the video input source
IJ IJ
The current signal source displays in the top right corner of the
Input Selection screen.
(Sample Image) b_put Selection screen
NOTE o:oYoucanlabelthevideoinputsources according to thespecific
devices you haveconnected t o theTV,see"Labeling thevideo
inputsources"on page56.
¢ Sources canbe"hidden," see"Labeling thevideoinputsources"
on page 56.
¢ "Novideosignal"will appear randomly on thescreenif no
signalis received in videoinputmode.
¢ If CECdevice is connected t o an HDMI ® input,the
REGZA-LINK ®iconappears.
If a REGZA-LINK _ device with HDMI <'* switching capability
(e.g. Audio Receiver) is connected to the HDMI <'_ input, press the
INPUT button on the remote control or TV control panel
repeatedly to highlight HDMI 1 or HDMI 2.
If the connected CEC device has any connected devices, a separate
device selection pop-up window appears:
HDMI I 1 Audio Receiver
(Sample Illustration) HDMF _ setting pop-up window
Press the INPUT button repeatedly to highlight the desired input
source, and then press the ENTER button.