Fax Parameters - Panasonic DP-C354 Operating Instructions Manual

Fax Parameters

No.
0 - 39 00 Print FaxParameterList
01 Density (HOME)
02 Resolution (HOME)
03 Original (HOME)
04 Stamp (HOME)
05 Memory (HOME)
06 Dialing Method
46
Parameter
Print a fax parameter list.
To cancel printing the fax
parameter list, press "Stop" and
"OK".
While processing the
cancellation, panel operation is
denied, and an error beep is
produced.
The feeding paper(s) will be
ejected before completing the
above cancellation operation.
If setting a parameter, an
asterisk mark (*) will be added
before the parameter number.
Set the default density according
to the most-used original.
Set the default resolution
according to the most-used
original.
When installing the optional
Email / Fax, the standard
setting can be changed.
Set the default of original type
according to the most-used
original.
When set to "On", all
successfully transmitted
originals are stamped (Memory
or Direct transmission).
In order Not to stamp the
Memory transmitted originals,
set "28 Stamp At Memory XMT"
to "Invalid".
Set the default for memory
transmission.
When set to "Off", originals are
transmitted directly without
storing into memory first.
Select a dialing method
according to your telephone line.
Comments
Stop, Start
-3, -2, -1, 0, 1, 2, 3
STD, Fine, S-Fine
Text,
Txt/Pht (Text/Photo),
Photo
Off, On
Off, On
Tone, Pulse
Selective Item Standard
Setting
Start
0
Fine
Text
Off
On
Tone