Panasonic DP-C354 Operating Instructions Manual page 17

Key Operator
No. Parameter
40 - 59 44 Data Deletion of
HD
45 WINS Server 1 IP
46 WINS Server 2 IP
47 Scope ID
48 IP Filter
49 IP Filter Mode
50 IP Filter Address
51 Community Name
(1)
52 Community Name
(2)
54 SysContact
55 SysName
56 SysLocation
59 SMB
60 - 79 60 SMB Master
Browser
Comments
Set the deletion security level of hard disk
data for every copy/print job.
When the optional hard disk unit is
installed, every copy/print job data is
automatically deleted after each job is
completed.
For higher security select Medium and
High, however, the deletion time
increases with the increase in security
level, and may take longer to erase the
data.
Set the IP address of WINS Server 1.
Set the IP address of WINS Server 2.
Set the Net Bios Scope ID.
Set whether the IP filter is to provide
security for network functions such as
printer or scanner.
Set whether the registered "50 IP Filter
Address" is allowed or denied for network
functions.
Set the IP filter address.
Up to 4 addresses can be set.
When setting only one IP filter address,
input the same IP address for both "Start
Address" and "End Address".
Set the SNMP community name (1).
Set the SNMP community name (2).
Set the system management name.
Set the system name.
Set the system installation location.
Set whether to use the machine on the
Microsoft Network (SMB).
Set whether to use the SMB Master
Browser.
Selective Item
Basic, Medium, High
3 digits x 4
3 digits x 4
Up to 223 characters
Off, On
Allow, Deny
3 digits x 4
Up to 15 characters
Up to 15 characters
Up to 31 characters
Up to 31 characters
Up to 31 characters
Off, On
Off, On
No. 45 to 60
After setting any of these parameters, turn the
machine's power switch Off, and then On again.
Standard
Setting
Basic
0. 0. 0. 0.
0. 0. 0. 0.
Off
Allow
0. 0. 0. 0.
public
public
Panasonic
DP-XXXX
Off
Off
17