Panasonic DP-C354 Operating Instructions Manual page 89

Key Operator
No. Parameter
15 - 29 29 Job Polling Time
30 - 44 30 Bindery Mode
31 File Server Name 1
32 File Server Name 2
33 File Server Name 3
34 File Server Name 4
35 File Server Name 5
36 File Server Name 6
37 File Server Name 7
38 File Server Name 8
39 NDS Tree
40 NDS Context
41 Print Server Name 1
42 Print Server Name 2
43 Print Server Name 3
44 Print Server Name 4
45 - 59 45 Print Server Name 5
46 Print Server Name 6
47 Print Server Name 7
48 Print Server Name 8
49 Job Time Out
50 Use MCP Server
Comments
Set the job polling time.
Select "Input" and enter the job
polling time.
Set Bindery Mode when using
the NetWare.
Set file server names. Up to
eight names can be set.
Set the NDS tree.
Set the NDS context.
Set print server names. Up to
8 names can be set.
Set the job time out.
Select "Input", and enter the job
time out.
Set "Yes" to use MCP (Memory
Card Printing) server.
No. 29 to 49
After setting any of these parameters, turn the
machine's power switch Off, and then On again.
Selective Item Standard
Setting
2 to 255 (Sec) 4 (Sec)
Off, On Off
Up to 31 characters
Up to 31 characters
Up to 77 characters
Up to 31 characters
4 to 255 (Sec) 10 (Sec)
No, Yes No
89