Panasonic DP-C354 Operating Instructions Manual page 37

Key Operator
No. Parameter
10 - 19 10 Bleedthrough Prevention
11 Contrast
12 Sharpness
13 Saturation
14 Tint
15 Color Balance
20 - 29 21 Page Insertion Default
22 Cover Mode Default
23 Job Build and SADF Mode
24 Maximum Copy Setting
25 M1, Size
26 M2, Size
27 Memory Overflow Warning
28 Color Spec (1Color)
29 Color Spec (2Color)
Comments
Set the default bleedthrough
prevention.
Set the default contrast.
Set the default sharpness.
Set the default color saturation.
Set the default tint.
Set the default color balance for
Cyan, Magenta, Yellow and
Black.
(Darker, Medium and Lighter
Areas)
Set the default page insertion.
Set the default Cover Mode.
Enable or disable SADF Mode.
Set the limit copy count.
Change the skyshot size
registered on the M1 key.
Change the skyshot size
registered on the M2 key.
Set sort copying when the
memory is full.
• Print
The read original is copied.
• Cancel
The read original is deleted.
Set the default one color.
"Preset 1 to 6" can be
selected when you set "20
Add User Color" in Copier
Settings.
Set the default two colors.
"Preset 1 to 6" can be
selected when you set "20
Add User Color" in Copier
Settings.
Selective Item Standard
Setting
Off, Level:1 to Level:6 Off
-3 to +3 0
-3 to +3 0
-3 to +3 0
-3 to +3 0
-3 to +3 0
Blank, Copy Blank
F, Blank, F, Blank
F, Copy,
FB, Blank,
FB, Copy
(F: Front cover, FB:
Front & Back cover)
No, Yes Yes
0 to 99 0
(0: No limit)
X: 5 to 432mm 70, 160
(mm)
Y: 5 to 297mm
X: 5 to 432mm 95, 220
(mm)
Y: 5 to 297mm
Print, Cancel Print
Red, Yellow, Green, Red
Magenta, Blue, Cyan,
Preset1, Preset2,
Preset3, Preset4,
Preset5, Preset6
Red, Yellow, Green, Red
Magenta, Blue, Cyan,
Preset1, Preset2,
Preset3, Preset4,
Preset5, Preset6
37