Fax Parameters - Panasonic Workio DP-C262 Function Manual

Fax Parameters

No.
0-39 00 Print FaxParameterList
01 Density (HOME)
02 Resolution (HOME)
03 Original (HOME)
04 Stamp (HOME)
05 Memory (HOME)
06 Dialing Method
07 Header Print
08 Header Format
32
Parameter
Print a fax parameter list.
Set the default density according
to the most-used original.
Set the default resolution
according to the most-used
original.
When installing the optional
Email / Fax, the standard
setting can be changed.
Set the default of original type
according to the most-used
original.
When set to "On", all
successfully transmitted
originals are stamped (Memory
or Direct transmission).
In order Not to stamp the
Memory transmitted originals,
set "28 Stamp At Memory XMT"
to "Invalid".
Set the default for memory
transmission.
When set to "Off", originals are
transmitted directly without
storing into memory first.
Select a dialing method
according to your telephone line.
Select the printing position of
sender's information (Header)
on the received original.
• Inside
Sender's information is
printed on the image.
• Outside
Sender's information is
printed outside of the image
without overlap.
• No Print
Sender's information is not
printed.
Select what contents to use for
the sender's information.
Comments
Stop, Start
-3, -2, -1, 0, 1, 2, 3
STD, Fine, S-Fine
Text,
Txt/Pht (Text/Photo),
Photo
Off, On
Off, On
Tone, Pulse
Inside, Outside,
No Print
Logo, ID
From To
Selective Item Standard
Setting
Start
0
Fine
Text
Off
On
Tone
Inside
Logo, ID