Table of Contents
Advertisement
6.3.8.
Rebuilding.the.RAID
This option is only for the RAID 1, RAID 5 and RAID 10 level.
Rebuilding the RAID with other non-RAID disk:
1.
If one member of physical SATA Hard disk within the array is off-line or failed,
the status of array will become to be degraded from normal. The following
displays as:
2.
Press <Ctrl-I> to enter the Intel Matrix Storage Manager RAID configuration
utility after POST.
3.
If there is available Non-RAID SATA Hard Disk, the utility will prompt
the windows for rebuilding the RAID. Press <Enter> to select the port of
destination disk for rebuilding or press <ESC> to exit
The size of destination disk for rebuilding should be the same or bigger as the
original hard disk.
ASUS RS120-E4/PA4
6-39
Advertisement
Table of Contents
