Apm Configuration - Asus RS120-E4 - 0 MB RAM User Manual

5.4.8 APM Configuration
Advanced

APM Configuration

Power Management/APM
Video Power Down Mode
Hard Disk Power Down Mode
Suspend Time Out(Minnute)
Throttle Slow Clock Ratio
Power Button Function
Restore on AC Power Loss
Resume On Ring
Resume On LAN
Resume On PME#
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Resume On RTC Alarm
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
Power.Management/APM.[Enabled]
Allows you to enable or disable the motherboard Advance Power Management
(APM) feature. Configuration options: [Enabled] [Disabled]
Video.Power.Down.Mode.[Suspend]
Allows you to select the video power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Hard.Disk.Power.Down.Mode.[Suspend]
Allows you to select the hard disk power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Suspend.Time.Out(Minnute).[Disabled]
Allows you to select the specified time at which the system goes on suspend mode.
Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [10 Min] [20 Min]
[30 Min] [40 Min] [50 Min] [60 Min]
Throttle.Slow.Clock.Ratio.[50%]
Allows you to select duty cycle in throttle mode.
Configuration options: [87.5%] [75.0%] [62.5%] [50%] [37.5%] [25%] [12.5%]
Power.Button.Mode.[On/Off]
Allows the system to go into On/Off mode or suspend mode when the power button
is pressed. Configuration options: [On/Off] [Suspend]
Restore.on.AC.Power.Loss.[Last.State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
ASUS RS120-E4/PA4
BIOS SETUP UTILITY
[Enabled]
[Suspend]
[Suspend]
[Disabled]
[50%]
[On/Off]
[Last State]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Enable or disable APM.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
5-29