Table of Contents
Advertisement
5.1.3.
ASUS.CrashFree.BIOS.2.utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore
the BIOS file when it fails or gets corrupted during the updating process. You can
update a corrupted BIOS file using the motherboard support CD that contains the
updated BIOS file.
Prepare the motherboard support CD containing the updated motherboard BIOS
before using this utility.
Recovering.the.BIOS.from.the.support.CD
To recover the BIOS from the support CD:
1.
Remove any floppy disk from the floppy disk drive, then turn on the system.
2.
Insert the support CD to the optical drive.
3.
The utility displays the following message and automatically checks the floppy
disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When no floppy disk is found, the utility automatically checks the optical drive
for the original or updated BIOS file. The utility then updates the corrupted
BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found!
Reading file "I8036A0.ROM". Completed.
Start flashing...
DO NOT shut down or reset the system while updating the BIOS! Doing so can
cause system boot failure!
4.
Restart the system after the utility completes the updating process.
The recovered BIOS may not be the latest BIOS version for this motherboard.
Visit the ASUS website (www.asus.com) to download the latest BIOS file.
5-6
Chapter 5: BIOS setup
Advertisement
Table of Contents
