Turning The Power On - Yamaha 142 Owner's Manual

Basic Operations

Turning the Power On

1
Connect the plugs of the AC power adaptor in the order shown in the illustration.
[YDP-162]
16
DC IN jack
(page 8)
2
AC power
adaptor
WARNING
Use the specified adaptor (page 32) only. The use of other adaptors may result in irreparable damage to both the adaptor
and the instrument.
CAUTION
Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during
electrical storms.
NOTE
Follow this procedure in reverse order when disconnecting the power adaptor.
2
Press the [
Power indicator
If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power
is still on.
When you're ready to turn the power to standby, press the [
indicator turns off.
CAUTION
Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum
level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC
outlet.
10
YDP-162/142 Owner's Manual
AC outlet
Power cord
3
1
The shape of the plug and outlet differ
depending on locale.
] (Standby/On) switch to turn the power on.
[YDP-142]
1
(Standby/On) switch
Power indicator
] (Standby/On) switch again for a second. The power
DC IN jack
(page 8)
2
AC power
AC outlet
adaptor