Konica Minolta bizhub C220 System Administrator Manual page 37

The following information is displayed for each device.
Table 4-2-2 Details about Devices in the History View
Columne Name
Last time used
Device Name
Status(Number of Jobs Waiting)
Memo
Location
Speed
Port
MAC Address
Model Name
Color/Black and White
PS3 (Only for PS version)
PCL-XL (Only for PCL version)
You can use the Edit and Delete functions to edit the list of devices on the History view.
• Edit function
You can use the Edit dialog box below to edit the device's Memo column.
You can start the Edit dialog box using one of the two methods shown below.
> Select the device, and click Edit at the bottom of the dialog box.
> Right click on the device to edit, and select Edit from the menu.
Figure 4-2-8 Example of History Edit Dialog Box
4. Using the Universal Print Driver
Description
This shows the printer-type icon and the last time the device
was used. See Table 2-4-1 Printer Type Icons for information
about the printer-type icons.
This shows the name of the device.
This shows the device status and job-queue congestion as
an icon and text. The display of the job queue status is only
supported for KONICA MINOLTA devices. See Status Icon
Specification, below, for details.
This shows the text you entered in Figure 4-2-8 History Edit
Dialog Box.
This shows the location where the device is installed. The
location must be entered on the device beforehand.
This shows the maximum print speed of the device in PPM.
This shows the port of the output device.
This shows the MAC address of the device.
This shows whether the device supports target PDL. Devices
that do not support target PDL cannot be used.
This shows whether the device is a color or B&W printer.
This shows whether the device supports target PDL. Devices
that do not support target PDL cannot be used.
33