Table of Contents
Advertisement
18
Installation
Levelling
When placing the appliance ensure that it stands
level. If necessary adjust the feet using the adjust-
ment spanner supplied.
Door alignment is dependent on proper levelling.
Door reversibility
To change the opening direction of the door, do these steps:
1.
Remove the plug from the power.
2.
Remove the ventilation grille. Remove the filling an install it on the opposite side of
the grille.
3.
Lay down the appliance back side down on a wooden support.
4.
Unscrew the lower hinge (a1).
Remove the door closure device from
the hinge and move the pin to the other
side (a2). Re-screw the door closure de-
vice provided within the accessory bag
on the opposite side.
5.
Remove the door closure device on the
door (b1).
Re-screw the door closure device provi-
ded within the accessory bag on the op-
posite side (b2).
6.
Remove the door.
Unscrew and move the pin to the oppo-
site side.
7.
Re-insert the door.
Re-screw the lower hinge.
Raise the appliance and install the ven-
tilation grille.
a1
b1
b2
a2
Advertisement
Table of Contents
