Rear Spacers; Levelling; Removing The Shelf Holders; Door Reversibility - AEG S71360KG User Manual

16
Installation

Rear spacers

In the bag with the documentation, there
are two spacers which must be fitted as
shown in the figure.
Slacken the screws and insert the spacer under
the screw head, then tighten again the screws.

Levelling

When placing the appliance ensure that it
stands level. This can be achieved by two adjust-
able feet at the bottom in front.

Removing the shelf holders

Your appliance is equipped with shelf retainers
that make it possible to secure the shelves dur-
ing transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).

Door reversibility

WARNING!
Before carrying out any operations, remove the plug from the power socket.
1
3
A
B
C
2