A72700GNW0 EN FREEZER USER MANUAL A73100GNW0...
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Contents CONTENTS 4 Safety information 6 Control panel 9 First use 10 Daily use 11 Helpful hints and tips 12 Care and cleaning 13 What to do if… 15 Technical data 15 Installation 19 Noises 21 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to...
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap- pliance are thoroughly familiar with its operation and safety features.
Safety information – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard.
Control panel • Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live. Installation For electrical connection carefully follow the instructions given in specific paragraphs. •...
Control panel Temperature warmer button Temperature colder button OK button Mode button ON/OFF button It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change is reversible. Display/Indicator 3 4 5 Timer indicator...
Control panel • -18°C for the freezer The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. FROSTMATIC function To switch on the function: Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes.
First use It is possible to change the time during the countdown and at the end by pressing the Tem- perature colder button and the Temperature warmer button. Child Lock function To lock the buttons from unintentional operation select the Child Lock function. To switch on the function: Press the Mode button until the corresponding icon appears.
Daily use Check that the drain hose at the rear of the cabi- net discharges into the drip tray. DAILY USE Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep- frozen food for a long time. To freeze small amount of fresh foods it is not necessary to change the present setting.
Helpful hints and tips Removal of freezing baskets from the freezer The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket to- wards yourself and, upon reaching the end point, remove the basket by tilting its front upwards.
Care and cleaning • make sure that the commercially frozen foodstuffs were adequately stored by the retail- • be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time; • not open the door frequently or leave it open longer than absolutely necessary. •...
What to do if… Make sure the door is open and then: Loosen the upper edge of the grille by pulling outward/downward. Pull the grille straight out to completely remove it. Vacuum clean under the cabinet. Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost"...
What to do if… Problem Possible cause Solution The door is not closed correctly. Refer to "Door open alarm". An error has occurred in meas- Call your service representative upper or lower square uring the temperature. (the cooling system will continue is shown in the tempera- to keep food products cold, but ture display.
Technical data Problem Possible cause Solution The appliance has no power. Connect another electrical appli- There is no voltage in the mains ance to the mains socket. Check socket. fuse. Contact a qualified electri- cian. The lamp does not work. The lamp is defective.
Installation Positioning Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance: Climate class Ambient temperature +10°C to + 32°C +16°C to + 32°C +16°C to + 38°C +16°C to + 43°C Location To ensure best performance, if the appliance is positioned below an overhanging wall unit,...
Installation Open the door. Remove the transport support from the door sides. Remove the transport support from the lower hinge (some models). Some models are fitted with a silencing pad under the cabinet. Do not remove this pad. Spacers Install the spacers provided within the accessory bag as shown in the figures.
Installation Levelling When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjust- ment spanner supplied. Door alignment is dependent on proper levelling. Door reversibility To change the opening direction of the door, do these steps: Remove the plug from the power.
Noises Unscrew the handle. On the opposite 180° side remove the hole covers by driving a 3-4 mm drift or drill into them. Install the handle. Fit the handle on to the opposite side by turning it on half circle. Install the hole covers provided within the accessory bag.
Environmental concerns SSSRRR! SSSRRR! CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.