Toro Recycler/Rear Bagger Bbc; Idler Arm System Disassembly (Recycler/Rear Bagger) - Toro 20330 - Low Wheel Walk Power Mower Service Manual

BBC / BOS / BCS
TORO RECYCLER/REAR BAGGER
BBC
Idler Arm System Disassembly (Recycler/
Rear Bagger)
1. Drain the fuel and oil. Remove the spark plug wire.
Disassembly for the idler arm begins on top of the
mower housing.
6-22
Fig 183 1350-001 a
2. On the left side of the mower next to the rear wheel,
loosen the clamp that secures the BBC cable to the
mower housing. Near the left front wheel, unhook
the spring end of the cable from the bellcrank.
Remove the screw, bellcrank, sleeve, and unhook
the control link from the lever (Fig. 184).
3. Take a loop of wire or rope and unhook the spring
under the lever (Fig. 185). With the tension removed
you can now remove the long screw through the
lever. We would suggest loosening this screw, but
leave it engaged at this time (Fig. 187).
B B
A A
A. Spring
B. Screwdriver
Fig 184 3428-0174
C C
Fig 185 3428-0177-2
C. Wire loop
WPM Drive Systems Manual