Toro 20330 - Low Wheel Walk Power Mower Service Manual page 50

SINGLE SPEED BEVEL GEAR TRANSMISSION
8. Push it into the larger hole (Fig. 066).
9. Remove both rear wheels and both wheel covers.
10. Remove the stop cable from the engine (Fig. 067)
and disconnect the self propel cable spring from the
transmission.
A
A. Stop cable
3-12
Fig 066 PICT-1897
Fig 067 DSC-017
11. Pinch the ends of the lower handle together to
disengage them from the pins on the HOC plates
(Fig. 068).
12. Tip the mower onto its right side (carburetor up) and
remove the blade.
13. Remove one of the belt guide screws and loosen
the other enough to pivot the guide away (Fig. 069).
Do not bend the belt guide. Slide the pulley/blade
adapter and belt off the crankshaft.
Fig 068 MVC-737
Fig 069 MVC-738
WPM Drive Systems Manual