Toro 20330 - Low Wheel Walk Power Mower Service Manual page 132

HANDLES AND CONTROL CABLES
2. Remove the e-clip on the left side pivot pin (Fig.
253).
A. E-clip
3. Slide the pivot assembly, bail and the brake cable to
the right until the bail slides off the pin (Fig. 254).
A
A. Traction lever
B. Pivot assembly
7-12
A A
Fig 253 DSC-4896a
B
C
Fig 254 DSC-4899a
C. Top slide
4. Continue sliding the pivot assembly and brake cable
off the pin.
5. Remove the shoulder bolt that the traction lever
pivots on and remove the traction lever.
6. Pull the pin out of the left hand handle. Note it
is snapped in and will require a locking pliers or
something similar to remove. When removed, the
springs will push the handle upwards (Fig. 255).
Fig 255 DSC-4907a
WPM Drive Systems Manual