Speed Transmission Models; Speed Control Cables - Toro 20330 - Low Wheel Walk Power Mower Service Manual

7. Slide the upper handle out of the top slide.
Reverse the process to assemble.
Note how the switch assembly, bail and control cable
are assembled before they are installed on the pin (Fig.
256).

3 Speed Transmission Models

Handles on 3 speed models are basic and easily
disassembled.
WPM Drive Systems Manual
HANDLES AND CONTROL CABLES
Fig 256 DSC-4908a

3 Speed Control Cables

The shift cables are not adjustable. To install the shift
cable, insert the end of the cable in the shift arm and slip
the end of the cable jacket into the bracket (Fig. 257).
The traction control cable tilts the transmission backward
to tighten the belt and engage the transmission (Fig.
258). It must tighten suffi ciently to fully drive the
transmission, yet allow the transmission to rock forward
and loosen the belt to disengage.
Fig 257 3428-0196
Fig 258 3428-0195
7-13