Paper Density - Dell 1320c - Color Laser Printer User Manual

Power Saver 5-60 min
*1
Timer Mode 2
10 min*
Alert Tone Control Panel
Tone
Machine Ready
Tone
Job Complete
Tone
Fault Tone
Alert Tone
Out of Paper
Alert Tone
Low Toner Alert
Tone
Time-Out 0
5-300 sec
30 sec*
Device Language English*
French
Italian
German
Spanish
Dutch
Danish
Norwegian
Swedish
Finnish
Polish
Portuguese
Japanese
Turkish
Auto Log Print Off*
On
Apply New Settings
Restart printer to apply new settings
*1 Enter 3 to put the printer in the power saver timer mode five minutes after it finishes a job. This uses much less energy, but requires more warm-
up time for the printer. Enter 3 if your printer shares an electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate with minimum warm-up time.
Select a value between 5 and 60 minutes for the power saver timer mode if you want a balance between energy consumption and a shorter warm-up
period.
The printer automatically returns to the standby mode from the power saver timer mode when it receives data from the computer. You can also return
the printer to the standby mode by pressing any button on the operator panel.

Paper Density

Purpose:
To specify the paper density.
Specifies the amount of time before the printer enters the Power Saver Timer Mode 2 (deep sleep mode) when
the times specified in Power Saver Timer Mode 1 and Power Saver Timer Mode 2 elapses after a print job is
complete.
Off* Does not sound an alert when you press a button on the panel.
On Sounds an alert when you press a button on the panel.
Off* Does not sound an alert when the printer is ready.
On Sounds an alert when the printer is ready.
Off* Does not sound an alert when a job is completed.
On Sounds an alert when a job is completed.
Off* Does not sound an alert when a job is terminated by some faults.
On Sounds an alert when a job is terminated by some faults.
Off* Does not sound an alert when an error occurs.
On Sounds an alert when an error occurs.
Off* Does not sound an alert when the printer runs out of paper.
On Sounds an alert when the printer runs out of paper.
Off* Does not sound an alert when toner becomes low.
On Sounds an alert when toner becomes low.
Disables the job timeout.
Specifies the amount of time the printer waits to receive additional bytes of data from the computer. When this
timeout expires, the print job is canceled.
Determines the language to be used for E-mail Alert.
Does not automatically print the Job History report.
Automatically print the Job History report when the number of Job History items reaches the maximum.
After you complete the settings, press the Apply New Settings button to apply the changes.
Press the Restart printer to apply the new settings button to apply the changes.