Printhead Cable, Cradle & Paper Deflector Removal - Lexmark WinWriter 150c Service Manual

4077-001
Printhead Cable, Cradle & Paper Deflector Removal
1. Remove the front cover.
2. Remove the printhead carrier assembly.
3. Disconnect the printhead cable from the encoder card. Note the
routing of the cable under the retaining clip on the carrier.
4. Separate the cradle from the printhead carrier assembly by
pushing out the cradle latches [A].
Note: Some machines have a cradle with removable interlock keys.
The interlock keys can be removed by prying the key latch on the
back of the cradle.
Rubber Backer
Interlock Keys
Cradle
5. Feed the folded end of the printhead cable through the opening
in the carrier assembly and remove the cable.
Note: Use the illustration to assemble the carrier parts in the correct
sequence.
41
Spring
Latch
Cable
A
Carrier
Deflector
Cable
Encoder Card