4077-001
Service Checks
Envelope Feed Service Check
FRU
1
Envelope Guide
First Print Line Service Check
FRU
1
End-of-Forms
Flag
2
End-of-Forms
Sensor
3
System Board
4
Feed Arm
Assembly
Action
Be sure the envelope guides have been turned
to the envelope load positions.
Be sure the envelope guides are against the
envelopes.
"Paper Feed Service Check"
Perform the
on page 10
.
Action
Check the flag for binds or damage.
Check the sensor for dirt.
"End-of-Forms Sensor Test" on
Perform the
page 22
to check the end-of-forms sensor on
the system board.
Check all parts of the feed arm assembly for
binds, wear, or damage.
Diagnostic Information
8