Nvram Defaults; Reset Nvram To Emea Defaults; Reset Nvram To U.s. Defaults - Lexmark 3000 Color Jetprinter Service Manual

NVRAM Defaults

Reset NVRAM to EMEA Defaults

This test resets the user defaults area of NVRAM to the EMEA
factory defaults. The page count and the error log do not change.
Note: Factory defaults are initially set to U.S.
To run the test:
1. With the printer off, press and hold the Paper Feed and Install
Print Cartridge buttons while turning the printer on.
2. Release the buttons to reset NVRAM to the EMEA factory
defaults.
A sheet of paper feeds and verifies the defaults have been set by
printing "EMEA".

Reset NVRAM to U.S. Defaults

This test resets the user defaults area of NVRAM to the U.S. factory
defaults. The page count and the error log do not change.
Note: Factory defaults are initially set to U.S.
To run the test:
1. With the printer off, press and hold the Install Print
Cartridge button while turning the printer on:
2. Releasing the buttons resets NVRAM to the U.S. factory
defaults.
A sheet of paper will feed and verify the defaults have been set by
printing "U.S.".
Diagnostic Aids 3-3