Table of Contents
Advertisement
4091-001
3. Diagnostic Aids
Test Page
This test prints the test page.
To run a complete test page of black and color patterns, be sure the
print cartridges are in good condition.
To enter the test:
Move the carrier to the far left, before turning the printer on
The test page prints the following lines:
Line 1 - Code level and date.
Line 2 - Manufacturer name.
Line 3 - Model name.
Line 4 - Motor type.
The next line is the black print cartridge nozzle pattern. The next
three lines are the purge pattern where all nozzles are printing. This
action cleans (purges) the nozzles. Another nozzle test pattern
follows.
These test patterns are used to verify all print cartridge nozzles are
working. There should be no breaks in the diagonal line. A break in
the diagonal line indicates one or more nozzles are not working.
Diagnostic Aids 3-1
Advertisement
Table of Contents
